This thing is ausome. I will send you a picture.
Thanks for making it. Badass.
I purchased both the AC condenser fan set and the dual electric radiator fan set. They work amazingly well. During the install I found out the original condenser was rotted out so I replaced it as well. My aircon is actually cold now. It is amazing, almost like new car AC performance. I have a black 2001 SE7 with the rear AC and I live in Oklahoma with 110 degree external temps. Air vent output is in the 40 degree range. Install difficulty? Not too bad, I recommend using blue locktite on the bolts due to the high vibration location. Took about 4 hours in total including the condenser swap and both kits. I have not noticed the need to upgrade to the 150 amp RR alternator, my battery is holding decent voltage with extensive usage of the kits.
On the d2 summers in AZ are hot. Seeing temps from 110+ for months with some weeks getting into 120s. This both helped my AC blow much colder inside the cabin. But also has helped with cooling the engine at stoplights with 0 drawbacks. Fantastic product
I purchased both the AC condenser fan set and the dual electric radiator fan set. They work amazingly well. During the install I found out the original condenser was rotted out so I replaced it as well.
My aircon is actually cold now. It is amazing, almost like new car AC performance.
I have a black 2001 SE7 with the rear AC and I live in Oklahoma with 110 degree external temps. Air vent output is in the 40 degree range.
Install difficulty? Not too bad, I recommend using blue locktite on the bolts due to the high vibration location. Took about 4 hours in total including the condenser swap and both kits.
I have not noticed the need to upgrade to the 150 amp RR alternator, my battery is holding decent voltage with extensive usage of the kits.
With the current design, you cannot go bigger than 3 inch pods on these brackets. I installed 5 inch ones on and the driver side makes contact with the wiper arm. This is with the pod light on the outer hole. I bought aux beam v ultras with side shooters so that I could mount them straight for more forward lighting and side. Unfortunately, I now have to either make some adapters to move the mounting forward or rotate them to point outwards to clear the arm but that's not what I wanted to do with this setup. If these brackets were a bit longer and moved the mounting position a further inch forward, this wouldn't be an issue. Besides that, if you're staying within 3 inches, they're fine. I put gaskets in between the hood and the bracket because mine did rub against it.